CURRICULUM VITAE
Name: Dr Martin Philip ANSELL
Institution: University of Bath
Department: Architecture and Civil Engineering
Post: Reader in Materials
(Associate Professor)
PERSONAL DETAILS
Dates appointed:
December 1976 (Research Officer)
October 1979 (Lecturer)
September 1990 (Senior Lecturer)
November 2006 (Reader)
Date of birth: 28 June 1950
EDUCATION AND
QUALIFICATIONS
Chislehurst and Sidcup
Grammar School :
8 '0' levels, (1961-66)
4 'A' levels, (1966-68)
University of Sussex: BSc Hons. degree in Materials Science
(1968-71)
Chelsea College
University of London: PhD in Solid
State Physics (1971-74)
Fellowship of the
Institute of Wood Science (FIWSc)
awarded in 1986.
President of Institute of Wood Science
from 1994 to 1996.
Fellowship of the Institute of Materials, Minerals and Mining (FIMMM) awarded in 2002.
CAREER HISTORY
1974-76: Research Engineer (Glass technology), Standard Telecommunication
Laboratories, Harlow, Essex.
1976-78: Research Officer, University
of Bath (SERC-funded work
on wood)
1978-79: Research Officer, University
of Bath (Wolfson
Foundation-funded programme on surface-stressed
flexible structures)
1979-90: Lecturer in Materials Science
1990-2006: Senior Lecturer in Materials
2006- : Reader in Materials
RESEARCH SUPERVISION
PhD theses supervised and
successfully examined in date order:
Small, G.D.: "Physical properties of a cellular composite", 1986,
(SERC CASE award).
Tsai, K.T.: "An investigation into the fatigue behaviour
of wood laminates for wind energy converter blade design", 1987,(SERC CASE award).
Stevens, C.A.: "Fracture and ageing of elastomeric O-ring seals", 1988,
(SERC CASE award jointly supervised with Mr M.G.
Phillips).
Bonfield, P.W.: "Fatigue evaluation of wood
laminates for the design of wind turbine blades", 1991, (Department of
Energy).
Bisanda, E.T.N.: "Sisal fibre reinforced composites", 1991, (Swiss
Development Cooperation).
Bond, I.P.: "Optimizing and standardizing the fatigue design of
commercial wood composite turbine blades", 1994, (Department of Trade and
Industry/EEC).
Hacker, C.L.: "Fatigue damage in wood composites", 1995, (Department
of Trade and Industry/SERC CASE).
Thompson, R.H.: "High frequency cyclic loading of chipboard", 1996,
(Building Research Establishment/SERC CASE).
Pritchard, J.: “The response of wood-based panel products to fatigue and creep
loads in flexure”, 1999, (EPSRC, Building Research Establishment).
Mwaikambo, L.Y. “Plant-based resources for
sustainable composites”, 2002, (NORAD).
Drake, R.D.: “Advancement of structural connection techniques for timber
buildings”, 2003, (RA, EPSRC).
Madhoushi, M.: “Fatigue performance of moment-resisting joints in engineered
timber structures”, 2003 (Iranian Government).
Harvey, K.: “Improved timber connections using bonded-in rods”, 2003
(EPSRC/EU).
Alam, P.: “The reinforcement of timber for structural applications and
repair”, 2004 (EPSRC CASE/TTL)
Abdan, K.: “Moulded properties and rheological behaviour of oil palm (Elaeis guineensis) empty fruit bunch fibres/polypropylene composites”,
2004 (Malaysian Government, External Supervisor for Universiti
Putra Malaysia).
Towo, A.: “Fatigue of sisal-reinforced natural fibre composites”, 2006
(Commonwealth Academic Staff Scolarship).
Ahmad, Z.: “Nano-
and micro-particle filled epoxy-based adhesives for in-situ timber bonding”, 2008 (Malaysian
Government).
Dhokia, V.: “Rapid manufacture of
soft flexible materials for customised shoes”, 2009
(Research Officer, IdMRC, lead supervisor Professor
S.T. Newman).
Gonzalez Murillo, C.E.: “Joining technology for natural fibre composites”, 2009 (CONACYT
and CIP, Mexico).
Thomson, A.: “Structural performance of non-metallic timber connections” 2011 (University of Bath
studentship, lead supervisor Professor Richard Harris).
Prajer, M.: “Interface morphology in polylactic
acid-sisal fibre composites” 2011 (BRE Trust).
Bawcombe, J.M.: “A study of Douglas-fir anatomical and mechanical properties and
their interactions” 2012 (PhD, Great Western Research, lead supervisor
Professor Richard Harris plus Professor Pete Walker, Industrial partner
Woodland Renaissance).
Crabtree, P.: “Design
and manufacture of symptom and sport specific insoles” 2012
(IdMRC/EPSRC).
Roseley, A. S. M.: “Creep of bonded-in connections for structural timber” 2013
(Malaysian Government and Rotafix (Northern) Ltd).
Hetherington,
A.C.: “Life cycle assessment
of the production of edible oil emulsions
a comparison of existing and novel process
technologies” 2015 (lead supervisor Dr. Marcelle
McManus)
Brandon, D.: “Non-metallic timber connections at elevated temperatures” 2015 (lead
supervisor Professor Richard Harris plus Professor Pete Walker)
MPhil candidates
supervised and successfully examined in date order:
Buckley, M.I.: “The hardwood resources of Europe and the USA - wood
science
and environmental
management” (P/t, self-funded), 1999
Aziz, S.H.: “Hemp- and kenaf-reinforced natural
fibre composites”, 2003 (Malaysian Government).
Belisle, R.A. “Microstructure and chemical composition of Colletes
halophilus nest cell linings”, 2011 (US-UK Fulbright
Commission, lead supervisor Dr Irene Turner)
Kurup, S.: “Process improvements for the manufacture of industrial polymeric
filters”, 2012 (MPhil in Knowledge Transfer with Pall Ilfracombe).
PhD candidates
currently under supervision:
Archila Santos, H.F.: “Bamboo composites
for structural applications in construction” (PhD, COLFUTURO, Bogotá D.C., Colombia).
Da Silva, C.: “Evaluation of VOC emissions in indoor air environments (ECO-SEE)”
(lead supervisor Dr Richard J. Ball)
Giampiccolo, A.: “Photo-catalytic coatings for the improvement of indoor air
environments (ECO-SEE)” (lead supervisor Dr Richard J. Ball)
Huang, P.: Non-homogeneous thermal properties of bamboo (lead supervisor Dr
Wen-Shao Chang)
Ong, C.B.: Performance of glue-laminated hardwood timber from fast-growing
plantation trees (lead supervisor Professor Pete Walker)
Shakil, M. Research on cementitious materials (lead supervisor Dr Juliana
Holley)
MPhil
candidate currently under supervision:
Jamshidi, A.: “Measurement enabled machining - introducing a robust product
verification process via metrology and metallurgy” (lead supervisor Prof Stephen
Newman)
RESEARCH GRANTS AWARDED
1978 SERC. Development of lightweight composites, £7,801 (with Prof.
B Harris).
1980 SERC/BP Ltd. Cellular composites, £1,400.
1982 SERC. Fatigue of wood composites, £32,338.
1983 SERC/CEGB. Crack growth in elastomeric seals, £4,080 (with Mr M G Phillips)
1984 SERC. Life prediction for wood composites, £10,340
1984 SERC/James Howden & Co Ltd.
Fatigue properties of wood, £2,960
1985 J Howden & Co Ltd. Fatigue
equipment, £2,000.
1986 SERC. "Composite materials reinforced with 3-D woven
fabrics", £57,940. (With Dr Alan Newton, UMIST).
1986 MAFF. "Biodegradation of thatching straw", £46,120.
(Project coordinator, Dr ADM Rayner).
1986 Department of Energy. "Fatigue evaluation of wood
laminates for the design of 100 metre diameter wind
turbine blades", £198,679.
1987 Swiss Development Cooperation. "Natural Fibre reinforced
Composite Materials", £4,500.
1989 Department of Energy "Prediction and measurement of the
fatigue life of laminated wood", £188,344.
1989 Marglass Ltd. "Development of
3-D composite systems", £4,200.
1989 Building Research Establishment. "High frequency cyclic
loading of chipboard", £16,128.
1990 EEC JOULE. "Fatigue properties and design of wingblades for wind turbines", 35,000 ECU (~£24,850).
1992 EEC JOULE extension. "Fatigue properties and design of wingblades for wind turbines" 25,000 ECU (~£17,750).
1992 Department of Trade and Industry. "Optimizing and
standardizing the fatigue design of commercial wood composite turbine
blades", £139,471.
1992 Building Research Establishment. "High frequency cyclic
loading of chipboard", £45,306.
1993 EEC JOULE. "Development of advanced blades for integration
into wind turbine systems", 35,000 ECU (~£24,850).
1995 EPSRC. “Advancement of structural connection techniques for
timber buildings”, £106,687.
1996 Building Research Establishment. "The response of
wood-based panel products to fatigue and creep loads in flexure”, £22,500.
1996 British Council. “Study of interfaces in wood composites
adhesive joints”, £765 (share of travel grant with Universities of Cambridge
and Nancy).
1997 British Council. “Study of interfaces in wood composites adhesive
joints”, £675 (share of travel grant with Universities of Cambridge and Nancy).
1997 EPSRC. “Improved timber connections using bonded-in rods”,
£122,595 (with Dr Allan Hutchinson, Oxford
Brookes University).
1997 EPSRC. “Life cycle design for engineered timber products”,
£114, 095 (with Professor Tony Medland, Department of Mechanical Engineering as
Co-investigator. Dr Richard Murphy of Imperial
College, London, has also been granted a separate
award of £121,478 based on the same case for support).
1997 EU FAIR. “Enhanced performance fibre reinforced timber
composites for European structures”, ~2,000 ECU (Exploratory Award).
1997 EU FAIR. “Composite local reinforcement for timber structures”
~2,000 ECU (Exploratory Award).
1998 EPSRC Materials for Better Construction Programme:, “Sensors for timber in construction” £88,519.
1998 EU FAIR. “Composite local reinforcement for timber structures”,
40,000 ECU.
2000 Royal Academy
of Engineering Travel
Grant, £500
2000 Armourers and Brasiers’
Company Travel Grant, £540
2001 British Council, Kuala
Lumpur, Malaysia,
Travel Grant, £750
2001 Scott Bader Ltd research support grant, £12,000
2002 British Council, Kuala
Lumpur, Malaysia,
Travel Grant, £750
2002 EPSRC grant “Equipment for new biomimetics
and robotic sensors and actuators laboratories” with Dr JFV Vincent (Principal
Investigator), Dr A Bowyer, Dr DG Hepworth (Mechanical Engineering and Design),
Dr J Hubble (Chemical Engineering) £147,610.
2003 TCS/Alderley Holdings Ltd, TCS 4216,
“Development of new insulation material for application to sub-sea production
equipment”, £99,044.
2003 Royal Academy
of Engineering Travel Grant,
Finland, £400.
2005 EPSRC overseas travel grant to Japan,
EP/C004787/1, “Opportunities in sustainable materials research for UK: Japanese
academics and automotive industries” (natural fibre composites), £1,996.
2005 KTP/Alderley Holdings, KTP 6161, “Development of new flexible sub sea
insulating systems from polymeric materials”, extension of TCS 4216 and
appointment of new Associate, £40,018.
2005 KTP/Rotafix (Northern Limited), KTP 1153,
“Improved adhesive systems for bonding timber” (epoxy adhesives with nano-particulate fillers), £107,812.
2006 EPSRC “The rapid
manufacture of soft flexible materials for customised
shoes (CRYMAN), (Principal Investigator, Professor ST Newman, with Professor AR Mileham), £341,844
within EPSRC Grant “Engineering Innovative Manufacturing Research Centre
Renewal”, IMRC, EP/E00184X/1, (Principal Investigator, Professor C McMahon),
£7,352,602.
2008-11 KTP/Pall Europe
Ltd, KTP 7011 (EPSRC/SWRDA), “Optimisation of the
selection and processing of polymers for the manufacture of industrial
filters”, £118,209.
2008 Royal Academy
of Engineering, travel grant to World Conference on Timber Engineering, Project
Code: RE-ME3734 (Andrew Thomson), £700.
2010-2013 KTP/Pall Europe Ltd,
(TSB), “NDE methods for leak detection in industrial filters”, £121,882.
2012-16 EU-FP7: ALAMSA (A
life-cycle autonomous modular system for aircraft material state evaluation and
restoring system) Lead Academic, Dr Michele Meo, EUR 4m.
2013-17 EU-FP7: ECO-SEE (Eco-innovative,
Safe and Energy Efficient wall panels and materials for a healthier indoor
environment) (Lead Investigator Prof Pete Walker), EUR 6.5m.
2013-2015 KTP/Helander Precision Engineering Ltd (EPSRC/TSB) (Lead
Academic: Prof Stephen Newman)
2014-2018 HORIZON 2020: ISOBIO
(Development and demonstration of highly insulating construction materials from
bio-derived aggregates) (Lead Academic: Dr Michael Lawrence), EUR 4m.
PUBLICATIONS
Dr Martin ANSELL
1. Brandt, D., Ansell,
M.P., and Cryer, N.B., "Minicourses in a first
year physics laboratory" Phys. Ed. 9, 23-26, 1974.
2. Ansell, M.P.,
"Conduction processes in thick film resistors, Part I", Electrocomp Sci. and Tech., 3, 131-140, 1976.
3. Ansell, M.P.,
"Conduction process in thick film resistors, Part II", ibid, 141-151.
4. Ansell, M.P. and
Rosser, W.J.N., "Low melting point glass composition based on the system
Pb0-V205-P205, applied to semi-conductor devices", Provisional Patent
Application, 1976.
5. Ansell, M.P. and
Harris, B., "Relationship between toughness and fracture surface
topography in wood and composites", In "Mechanical behaviour of materials", Eds. Miller, K.J. and Smith,
R.F., 3, 309-318, Pergamon 1979.
6. Ansell, M.P. and
Harris, B., "Fabrics-characterisation and
testing", In "Air-Supported Structures: The
State of the Art", 121-130, Institution of Structural Engineers, 1980.
7. Ansell, M.P.,
"Cellular composites and process and apparatus for their
manufacture", European Patent Office, No. 81300522-0, 1981.
8. Ansell, M.P.,
"Acoustic emission as a technique for monitoring fracture processes in
wood", in "Structural Uses of Wood in Adverse Environments",
Eds. Meyer, R.W. and Kellogg, R.M., Van Nostrand
Reinhold Company, 451-466, 1982.
9. Ansell, M.P.,
"Acoustic emission from softwoods in tension", Wood Sci. Technol.,
16, 35-58, 1982.
10. Ansell, M.P.,
"Stake and socket fracture in polyester fibres", J. Mats. Sci. Lett.
2, 47-49, 1983.
11. Ansell, M.P.,
"The influence of flexural fatigue on the tear resistance of PTFE-coated
glass fabric", In "Fatigue in Polymers", The Plastics and Rubber
Institute, Chapter 12, 1983.
12. White, N.M. and Ansell,
M.P., "Straw-reinforced polyester composites", J. Mat. Sci., 18,
1549-1556, 1983.
13. Ansell, M.P., Hill,
C.A.S. and Allgood, C. "Architectural
PTFE-coated glass fabrics - their structure and limitations", Textile
Research J., 692-700, 1983.
14. Ansell, M.P.
"The degradation of polyester fibres in a PVC-coated fabric exposed to
boiling water", J. Text. Inst. 5, 263-271, 1983.
15. Ansell,
M.P. and Harris, B., "Gewebe-merkmale und prufung"
Lufthallenhandbuch, IL 15, Institut for Leichte Flachentragwerke, Eds. Frei Otto, E Happold, E. Bubner, University of Stuttgart Press, 221-229, 1983.
16. Ansell, M.P., Barnes,
M.R. and Williams, C.J.K., "Structural properties tests for coated
fabrics". In "The design of air-supported structures, Institution of
Structural Engineers, 35-46, 1984.
17. Ansell, M.P.
"Microanalysis of airhouse membranes". In
"The design of air-supported structures, Institution of Structural Engineers , 47-56, 1984.
18. Ansell, M.P. and
Hill, C.A.S., "Degradation of airhouse
membranes", In "The design of air-supported structures, Institution
of Structural Engineers, 57-72, 1984.
19. Ansell, M.P. "Characterising the fatigue properties of wood for
engineering design", in "Materials in the design of wind turbine
generators", British Wind Energy Association /Department of Energy,
pp.35-69, June 1984.
20. Ansell, M.P. and
Tsai, K.T. "Fatigue testing of wood composites for aerogenerator
rotor blades" in "Wind energy conversion, 1984", Ed. P.
Musgrove, Cambridge University Press, 239-255, 1984.
21. Roe, P.J., and Ansell,
M.P., "Jute reinforced polyester composites", J. Mat. Sci., 20,
4015-4020, 1985.
22. Ansell, M.P.,
"Cellular composites and process and apparatus for their
manufacture", Canadian Patent No.1,166,942, 1985.
23. Tsai, K.T. and Ansell,
M.P., "Fatigue testing of wood composites for aerogenerator
rotor blades, Part II, Effect of moisture and R-ratio", in "Wind
energy conversion 1985", Ed. A. Garrad, Pub.
Mechanical Engineering Publications Ltd., 285-292, 1985.
24. Ansell, M.P.
"The degradative effect of boiling water on polyester fibres in a PVC
coated fabric", J. Coated Fabrics, 14, 242-255, 1985.
25. Clark, R.A. and Ansell,
M.P. "Jute and glass fibre hybrid laminates", J. Mat. Sci., 21,
269-276, 1986.
26. Ansell, M.P., Tsai,
K.T., Guitard, D., and El Amri,
F. "Elastic and fatigue characteristics of wood and wood laminates for
wind turbine blades." in "The dynamic behaviour
of wind turbines", Pub. AFME, Paris,
France, 1986.
27. Ansell, M.P.,
"Structure and mechanical properties of coconut timber for boat
building". Overseas Development Administration, 1986.
28. Small, G.D. and Ansell,
M.P., "The energy absorbing properties of a novel cellular
structure", J. Mat. Sci., 22, 2717-2722, 1987.
29. Ansell, M.P.,
"Layman's guide to fatigue", In "Wind Energy Conversion
1987" Ed. J.M. Galt, Pub. Mechanical Engineering Publications Ltd., 39-54,
1987.
30. Fernando, G.F., Ansell,
M.P., Georgallides, C. and Newton, A., "Design, fabrication and
properties of composites with multi-layered and 3-D glass fabric
reinforcement", In Composites Evaluation, Ed. J. Herriot, Butterworth
Scientific, 96-104, 1987.
31. Ansell M P.,
"Fatigue testing of wood for aerogenerator
blades", SERC Bulletin, 3, No 8, 22-23, 1987.
32. Bonfield P W and Ansell
M P. "Fatigue testing of wood composites for aerogenerator
blades, Part III. Axial tension/compression fatigue". In "Wind Energy
Conversion 1988" Ed. D J Milborrow, Pub.
Mechanical Engineering Publications Ltd, 377-383, 1988.
33. Ansell, M.P., Bonfield, P.W. and Tsai, K.T. "Fatigue testing of
laminated wood for generator blades". In "Windpower
'88", AWEA 18, Honolulu,
Hawaii, American Wind Energy
Association, pp 113-126, 1989.
34. Bonfield, PW and Ansell, MP. "Fatigue testing of wood composites
for aerogenerator rotor blades. Part IV - Shear, size
effect, modulus changes and block loading". In
EWEC '89 - Proceedings of the Euoropean Wind Energy
Conference, Peter Peregrinus Ltd., 406-410, 1989.
35. Ansell, M.P., Tsai,
K.T. and Bonfield, P.W. "Testing wood in
Fatigue". Proceedings of an IEA Workshop on fatigue in wind turbines,
21-22 March 1988, 1990.
36. Tsai, K.T. and Ansell,
M.P., "The fatigue properties of wood in flexure". J. Mat. Sci., 22,
865-878, 1990.
37. Zic, I, Ansell,
MP, Newton, A and Price, RW, "Mechanical properties of composite
panels reinforced with integrally woven 3-D fabrics". J. Text. Inst., 81,
No.4, 461-479, 1990.
38. Bonfield, PW and Ansell, MP, "Fatigue testing of wood composites
for aerogenerator rotor blades. Part V. Life
prediction analysis and hysteresis", In "Wind Energy Conversion
1990" Eds. TD Davies, JA Halliday and JP Palutikof,
Pub. Mechanical Engineering Publications Ltd, 19-24, 1990.
39. Bisanda, ETN and Ansell,
MP, "The effect of surface treatment on the properties of sisal-epoxy
composites", in "Cellulose Sources and Exploitation", Eds. JF
Kennedy, GO Phillips and PA Williams, Pub. Ellis Horwood
Ltd., 235-240, 1990.
40. Bisanda, E.T.N. and Ansell,
M.P., "The effect of silane treatment on the
mechanical and physical properties of sisal-epoxy composites". Comp. Sci.
and Tech., 41, No.2, 163-176, 1991.
41. Bonfield, P.W. and Ansell, M.P., "The fatigue properties of wood
in tension, compression and shear". J. Mat. Sci., 26, 4765-4773, 1991.
42. Bonfield, P.W. and Ansell, M.P., "Fatigue testing of wood
composites for aerogenerator rotor blades. Part VI.
Spectrum fatigue loading, life prediction and damage rates", In "Wind
Energy Conversion 1991" Eds. Quarton, D. and
Fenton, V. Pub. Mechanical Engineering Publications Ltd, 311-316, 1991.
43. Ansell, M.P. Hancock,M. and Bonfield,
P.W. "Wood composites - the optimum fatigue resistant materials for
commercial wind turbine blades". In the Proceedings of the International
Timber Engineering Conference, London,
4.194-4.202, September 1991.
44. Bisanda, E.T.N. and Ansell,
M.P., "The properties of sisal-CNSL composites". J. Mat. Sci., 27,
1690-1700, 1992.
45. Ansell, M.P., "A
review of the 1991 International Timber Engineering Conference". J. Inst.
Wood Sci., 12, No.5, 271-278, 1992.
46. Bonfield, P.W., Bond, I.P., Hacker,
C.L. and Ansell, M.P., "Fatigue
testing of wood composites for aerogenerator rotor
blades. Part VII. Alternative wood species and joints", in "Wind
Energy Conversion 1992", ed. Clayton, B.R.. Pub.
Mechanical Engineering Publications Ltd, 243-250, 1992.
47. Ould, M.J.T. and Ansell,
M.P.," Development of norms and standards for wood composite materials
used in the construction of wind turbine blades", in "Wind Energy
Conversion 1992", ed. Clayton, B.R.. Pub.
Mechanical Engineering Publications Ltd, 251-258, 1992.
48. Bonfield, P.W., Bond, I.P., Hacker,
C.L. and Ansell, M.P., "Fatigue
testing of wood composites for aerogenerator rotor
blades. Alternative wood species and joints". Report on the 23rd Meeting
of Experts - Fatigue of Wind Turbines, Golden, Colorado, Pub.
Research Centre Jülich for the International Energy
Agency, 41-45, October 1992.
49. Bond, I.P., Hacker, C.L., Ansell,
M.P. and Dutton, A.G., "Infra red condition monitoring of different joint
geometry samples subjected to reversed (R=-1) loading". Report on the 23rd
Meeting of Experts - Fatigue of Wind Turbines, Golden, Colorado, Pub.
Research Centre Jülich for the International Energy
Agency, 117-120, October 1992.
50. Robson, J., Hague, J., Newman, G., Jeronimidis,
G. and Ansell, M., "Survey of
natural materials for use in structural composites as reinforcement and
matrices". Report No.EC/4316/92 to DTI LINK Structural Composites
Committee, January 1993.
51. Bond, I.P., Ansell,
M.P. and Hacker, C.L., "Fatigue testing of wood composites for aerogenerator rotor blades. Part VIII. Statistical
treatment of constant life data for design optimization", Proceedings of
the 1993 European Community Wind Energy Conference, Lübeck-Travemünde, Germany, Pub. H.S. Stephens and
Associates, 137-140, 1993.
52. Ansell, M.P., Bond,
I.P. and Bonfield, P.W., "Constant life diagrams
for wood composites and polymer matrix composites", Proceedings of the
Ninth International Conference on Composite Materials (ICCM-9), Madrid, Spain,
ed. Miravete, Antonio, Pub. University of Zaragoza,
Woodhead Publishing Ltd., V, 692-699, 1993.
53. Bond, I.P. and Ansell,
M.P., "Effect of the marine environment on the fatigue life of wind
turbine materials", Proceedings of the BWEA/DTI Joint Seminar on
"Prospects for offshore wind energy: the state of the art and future
opportunities", Pub. ETSU, Harwell, June 1993.
54. Bond, I.P. and Ansell,
M.P., "Effect of the marine environment on the fatigue life of wind
turbine materials", Wind Engineering, 17, 2, 1993, 100-107.
55. Bonfield, P.W., Dinwoodie,
J.M., Ansell, M.P. and Hacker, C.L.,
"Damage quantification of wood and wood-based products via stress-strain
hysteresis loop capture", Proceedings of the COST 508 Wood Mechanics
Workshop on "Wood: Plasticity and Damage", eds. Birkinshaw,
C., Morlier, P. and Seoane,
I., Limerick, Ireland, 1993, 185-203.
56. Hacker, C.L., Bond, I.P. and Ansell,
M.P., "Fatigue testing of wood composites for aerogenerator
blades. Part IX. Alternative adhesives". In "Wind energy conversion
1993", ed. Pitcher, K.F., Pub. Mechanical Engineering Publications Ltd.,
1993, 269-274.
57. Bonfield, P.W., Ansell,
M.P. and Dinwoodie, J.M., "Fatigue testing of
wood: a detailed guide for the development of life-prediction formulae from
fatigue data". Proc. IUFRO S5.02, International Timber Engineering
Conference, 163-174, Sydney,
Australia, July
1994.
58. Thompson, R.J.H., Bonfield, P.W.,
Hacker, C.L., Dinwoodie, J.M. and Ansell, M.P., "Creep and fatigue of structural
grade chipboard - non-reversed loading in 4-point bending". Proceedings of
the International Conference on Timber, High Wycombe,
July 1994.
59. Thompson, R.J.H., Bonfield, P.W.,
Hacker, C.L., Dinwoodie, J.M. and Ansell, M.P., "Creep and fatigue of chipboard
in flexure". Proceedings of the Timber Engineering Conference, Gold Coast, Australia,
1994.
60. Bonfield, P.W.,
Hacker, C.L., Ansell, M.P. and Dinwoodie, J.M., "Fatigue and creep of chipboard. Part
1, R = 0.01", Wood Science and Technology, 28, 1994, 423-435.
61. Bond, I.P. and Ansell,
M.P., “Fatigue testing of wood composites
for aerogenerator blades, Part X. Life prediction and
variable amplitude testing using extreme 'in-service' load conditions”, ".
In "Wind energy conversion 1994", Pub. Mechanical Engineering
Publications Ltd., 1994, 199-204. Presented at British Wind Energy Association conference, Stirling, 1994.
62. Hacker, C.L. and Ansell,
M.P. "Fatigue testing of wood
composites for aerogenerator blades, Part XI.
“Assessment of fatigue damage accumulation using a fatigue modulus approach”, In
"Wind energy conversion 1994", Pub. Mechanical Engineering
Publications Ltd., 1994, 205-210. Presented at British Wind Eenrgy Aaccociation
conference, Stirling,
1994.
63. Hacker, C.L and Ansell,
M.P., “Stress-strain hysteresis loop capture in the assessment of fatigue damage
accumulation in wood composites”. Proceedings of the 5th European Wind Energy
Association Conference, Vol.1, Thessaloniki,
Greece, 1994,
402-407.
64. Ansell, M.P.,
"Giving timber a harder cell", Timber Trades Journal, 18 March 1995,
26.
65. Spencer, S. and Ansell,
M.P., "Material world", Timber Trades Journal, 8/15 April 1995,
15-16.
66. Energy Working Party of the Institute
of Materials, "Materials
technology foresight for the UK
power generation industry", The Institute of Materials, April 1995.
67. Ansell, M.P.,
"Fatigue design for timber and wood-based materials”, STEP lecture E22,
Published in “Timber Engineering STEP 2, Design - Details and structural
systems”, Pub. Centrum Hout, The
Netherlands,
1995.
68. Ansell, M.P., Bond,
I.P. Bonfield, P.W. and Hacker, C.L., "Fatigue
properties of wood composites”, Published as Chapter 7, pp. 107-122 in “Design
of composite structures against fatigue”, Pub. Mechanical Engineering
Publications Ltd., 1996.
69. Robson, D., Hague, J., Newman, G., Jeronimidis,
G. and Ansell, M., "Natural
materials for use in structural composites as reinforcement and matrices",
Pub. Woodhead Publishing Ltd., 1996.
70. Newton,
A., Georgallides, C. and Ansell,
M.P., "A geometrical model for a 2-layer woven composite reinforcement
fabric", Composites Science and Technology, 56, 1996, 329-337.
71. Drake, R., Ansell,
M.P., Mettem, C. and Bainbridge, R.J., “Advancement
of structural connection techniques for timber buildings. Part 1: Performance
of GRP pultruded dowels versus steel dowels”, Proceedings of International COST
508 Wood Mechanics Conference, Stuttgart,
1996, 353-364.
72. Pritchard, J., Thompson, R.J.H., Bonfield,
P.W. and Ansell, M.P., “A comparison
of the fatigue and creep performance of commercial grade chipboard, OSB and MDF
based on equivalent applied stress levels”, Proceedings of International COST
508 Wood Mechanics Conference, Stuttgart,
1996, 409-423.
73. Thompson, R.J.H., Bonfield, P.W., Dinwoodie, J.M. and Ansell,
M.P., “Fatigue and creep of chipboard, Part 3.The effect of frequency”, Wood Sci and Tech, 30, 1996, 293-305.
74. Thompson, R.J.H., Ansell,
M.P, Bonfield, P.W. and Dinwoodie,
J.M., “Fatigue and creep in wood-based panel products: an introduction to
research at the University of Bath”, Proceedings of the 25th Forest
Products Research Conference CSIRO Division of Forestry and Forest Products,
Clayton, Victoria, Australia, 1996, Chapter 4/2 (8 pp).
75. Pritchard, J., Ansell,
M.P., Bonfield, P.W. and Thompson, R.J.H., “Dynamic
mechanical thermal analysis of wood-based panel products”, Proceedings of the
25th Forest Products Research Conference CSIRO Division of Forestry
and Forest Products, Clayton, Victoria, Australia, 1996, Chapter 4/4 (8pp).
76.
Onic, L., Ansell, M.P., Deglise, X., Pizzi, A., Merlin,
A. and Bucur, V., “L’analyse
thermomécanique dynamique comme technique de controle des
reactions de reticulation des resines dans les composites à base de bois”, 4ème Congrès Français d’Acoustique, Marseille, 14-18 Avril 1997.
77.
Pritchard, J., Ansell, M.P., Bonfield,
P.W., Barlow, C.Y. and Bucur, V., “Understanding the
fatigue and creep properties of MDF, OSB and chipboard using environmental
scanning electron microscopy and x-ray densitometry”, Proceedings of IUFRO S
5.02 Timber Engineering, Copenhagen, Denmark, 18-20 June 1997.
78. Pritchard, J., Ansell,
M.P., Bonfield, P.W., Barlow, C.Y. and Bucur, V., “Understanding the fatigue and creep properties
of MDF, OSB and chipboard using environmental scanning electron microscopy and
x-ray densitometry”, Proceedings of the First European Panel Products
Symposium, pp. 85-99, Llandudno, Wales, 1997.
79. Onic, L., Bucur,
V., Ansell, M.P., Pizzi, A., Deglise, X. and
Merlin, A.., “Dynamic thermomechanical analysis as a control technique for
thermoset bonding of wood joints”, Int. J. of Adhesion and Adhesives, 18, 1998,
89-94.
80. Bainbridge, R.J., Mettem, C., Drake,
R., and Ansell, M.P., “Composites in
timber construction”, Proceedings of FRC’98, Seventh International Conference
on Fibre Reinforced Composites, Newcastle upon Tyne, April 1998, 19-26.
81. Bond, I.P. and Ansell,
M.P., “Fatigue properties of jointed wood composites. Part 1: Statistical
analysis, fatigue master curves and constant life diagrams”, J. Mat.Sci., 33, 1998, 2751-2762.
82. Bond, I.P. and Ansell,
M.P., “Fatigue properties of jointed wood composites. Part 2: Life prediction
analysis for variable amplitude loading”, J. Mat.Sci.,
33, 1998, 4121-4129.
83. Bucur, V., Ansell,
M.P., Barlow, C.Y., Pritchard, J., Garros, S. and Deglise, X., "Physical methods for characterizing wood
composite panel products", Holzforschung, 52, 1998, 553-561.
84. Drake, R.D., Ansell,
M.P., Aram, J.W.E., Mettem, C.J. and Bainbridge, R.,
“Non-metallic connections for timber structures”, Proceedings of 5th
World Conference on Timber Engineering, WCTE’98, Montreux, Switzerland, ISBN
2-88074-387-7, Vol. 2, 17-20 August 1998, 577-584.
85. Drake, R.D., Aram,
J.W.E. and Ansell, M.P, “The
performance of pultruded GRP connectors in multiple dowelled double shear
timber joints”, J. Inst. Wood Sci., 14, No.6, (Issue 84), Winter
1998, 277-283.
86. Irving, A.D., Drake, R.D. and Ansell, M.P., “Thermo-visco-elastic
representation of composite wood joints under fatigue conditions”, proceedings
of the workshop “Damage in wood” organised by the
COST Action E8, Bordeaux,
27/28 May 1999.
87. Bainbridge, R., Mettem, C.J. and Ansell, M.P., “An overview of research to assess
fatigue performance of bonded-in rods for structural timber connections using
three adhesive types”, proceedings of the workshop “Damage in wood” organised by the COST Action E8, Bordeaux, 27/28 May 1999.
88. Mwaikambo,
L.Y. and Ansell, M.P., “The effect
of chemical treatment on the properties of hemp, sisal, jute and kapok fibres
for composite reinforcement”, Proceedings of the 2nd International
Wood and Natural Fibre Composites Symposium, Kassel, Germany, 28-29 June 1999.
89. Ansell,
M.P., “Timber research in construction and engineering”, J. Inst. Wood Sci.,
15, No.1, Summer 1999, 39-50.
90. Ansell,
M.P., “Timber research in construction and engineering”,Technology Letters, Vol. 3, No.2, 1999, 5-27, ISSN
1369-3735.
91. Mwaikambo,
L.Y. and Ansell, M.P., “The effect
of chemical treatment on the properties of hemp, sisal, jute and kapok fibres
for composite reinforcement”, Die Angewandte Makromolekulare Chemie, vol. 272,
issue 1, 1999, 108-116.
92. Drake, R.D., Ansell,
M.P., Mettem C.J. and Bainbridge, R., “Non-metallic, adhesiveless joints for timber structures”, Proceedings of
the 32nd Meeting of Working Commission W18, CIB-W18, Graz, Austria,
Paper 32-7-11, August 1999, ISSN 0945-6996.
93. Mettem, C.J. Bainbridge, R.J., Harvey,
K., Ansell, M.P., Broughton, J.G.
and Hutchinson, A.R., “Evaluation of material combinations for bonded in rods
to achieve improved timber connections”, Proceedings of the 32nd
Meeting of Working Commission W18, CIB-W18, Graz, Austria, Paper 32-7-13,
August 1999, ISSN 0945-6996.
94.
Mwaikambo, LY, Ansell,
MP and Kawiche, GM: Development of natural fibre
composites: An overview, workshop on “Materials selection and design”,
International Centre for Science and High Technology, Trieste, Italy,
November 15-19, 1999.
95. Spong, K., Murphy R.J., Hillier, W., McPherson,
C.J., Medland, A.J. and Ansell,
M.P., “Life cycle assessment for the ash frame of the morgan
car”, Proceedings of 7th LCA Case Studies Symposium, by SETAC
Europe, 2 December 1999, Brussels.
96. Mwaikambo, L.Y.
and Ansell, M.P., “Characterisation of cashew nut shell liquid for composite manufacture”,
Proceedings of the Third International Symposium on Natural Polymers and
Composites, ISNaPol/2000, São Pedro, SP, Brazil, 14th-17th
May 2000, Eds. Luiz Henrique Capparelli Mattoso, Alcides Leão e
Elisabete Frollini, ISBN: 85-86463-07-8, pp. 367-375, 2000.
97. Drake, R.D., and Ansell,
M.P, “Evaluation of joints in timber structures using pultruded GRP dowels and
implications for Eurocode 5-based design”, The Structural Engineer, Vol. 78,
No. 12, pp 28-32, 20th June 2000.
98. Mettem, C.J. Bainbridge, R.J., Harvey,
K., Ansell, M.P., Broughton, J.G.
and Hutchinson, A.R., “Improved timber
connections - evaluation of material combinations for bonded in rods”, Paper
TEP1-BRods, Timber Engineering Papers, Vol.1, TRADA Technology, High Wycombe,
2000.
99. Harvey, K. and Ansell, M.P., "Improved timber connections
using bonded-in rods", Proceedings of 6th World Conference on Timber
Engineering, Whistler, British Columbia, 31st July to 3rd August 2000, Paper
P04 (pp. 1-8).
http://timber.ce.wsu.edu/Resources/papers/P4.pdf
100. Nishimura,
T. and Ansell, M.P., "Monitoring fibre orientation in OSB during
production using filtered image analysis", Proceedings of 6th World
Conference on Timber Engineering, Whistler, British Columbia, 31st July to 3rd
August 2000, Paper P54.
101. Pritchard, J. and Ansell,
M.P., "Low-cost optical fibre sensors
for strain measurement in LVL subjected to cyclic humidity conditions",
Proceedings of 6th World Conference on Timber Engineering, Whistler, British
Columbia, 31st July to 3rd August 2000, Paper P71.
102. Harvey, K., Ansell,
M.P., Mettem, C.J. and Bainbridge, R.J., “Bonded-in pultrusions for moment-resisting timber connections”,
Proceedings of 33rd Meeting of Working
Commission W18, CIB-W18, Delft, The
Netherlands, 28th to 30th August 2000, Pub. University of Karlsruhe,
Paper no. CIB-W18/33-7-11, ISSN 0945-6996, 2000.
103. Bainbridge, R., Mettem, C.J., Harvey,
K. and Ansell, M.P., “Fatigue
performance of bonded-in rods in glulam using three adhesive types”,
Proceedings of 33rd Meeting of Working
Commission W18, CIB-W18, Delft, The
Netherlands, 28th to 30th August 2000, Pub. University of Karlsruhe,
Paper no. CIB-W18/33-7-12, ISSN 0945-6996, 2000.
104. Nishimura,
T. and Ansell, M.P., “Monitoring
fibre orientation in OSB during production using filtered image analysis”,
Proceedings of Fourth European Panel Products Symposium, Llandudno,
October 2000.
105. Buckley, M.I. and Ansell,
M.P., “Sourcing US hardwood materials for French furniture manufacture: “chain
of custody” case study”, J. Inst. Wood Sci., Vol. 15, No. 4 (Issue 88), Winter
2000, pp.183-193, 2000.
106. Hacker, C.L. and Ansell,
M.P., “Fatigue damage and hysteresis in wood-epoxy laminates”, Journal of
Materials Science, 36 (9) 609-621,
2001.
107.
Madhoushi, M. and Ansell, M.P.,
“Fatigue Performance of Timber Connections based on GFRP Bonded-in Rods”,
Proceedings of First International Conference of the European Society for Wood
Mechanics, Lausanne, Switzerland, April 2001
108. Eichhorn, S. J.,
Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell,
M. P., Dufresne, A., Entwistle, K. M.,
Herrera-Franco, P. J., Escamilla, G. C., Groom, L., Hughes, M., Hill, C., Rials, T. G., Wild, P. M. 2001. Review: Current
international research into cellulosic fibres and composites Journal of
Materials Science, 36 (9) 2107-2131,
May 2001.
109. Pritchard, J., Ansell,
M.P., Thompson, R.J.H., and Bonfield, P.W., “Effect
of two relative humidity environments on the performance properties of MDF, OSB
and chipboard. Part 1. MOR, MOE and fatigue life performance”, Wood Science and
Technology 35 (2001) 5, 395-403.
110. Pritchard, J., Ansell,
M.P., Thompson, R.J.H., and Bonfield, P.W., “Effect
of two relative humidity environments on the performance properties of MDF, OSB
and chipboard. Part 2. Fatigue and creep performance”, Wood Science and
Technology 35 (2001) 5, 405-423.
111. Mwaikambo, LY and Ansell, MP: Cure characteristics of alkali catalysed cashew nut shell liquid – formaldehyde resin,
Journal of Materials Science, 36 (2001) 3693-3698.
112. Bainbridge, R.J., Larsen, P., Mettem, C.J., Alam, P. and Ansell,
M.P., “Timber-steel shot fired nail connections at ultimate limit states”,
Proceedings of 34th Meeting of Working
Commission W18, CIB-W18, Venice, Italy, 22nd
to 24th August 2001, Pub. University
of Karlsruhe, Paper no.
CIB-W18/34-7-13, ISSN 0945-6996.
113. Bainbridge, R., Harvey, K., Mettem, C.J., and Ansell,
M.P., “Fatigue performance of structural timber connections”, proceedings of
IABSE Conference “Innovative wooden structures and bridges”, Lahti, Finland,
29-31 August 2001.
114. Nishimura, T., Amin, J. and Ansell, M.P.,
“Image analysis of the shape and size of strands in model OSB panels and
correlation with MOE and MOR”, Proceedings of the Fifth European Panel Products
Symposium, Llandudno, Wales, 10-12 October 2001, ISBN:
1 84220 023 2, pp155-166.
115. Mwaikambo, L.Y. and Ansell, M.P., “The determination of porosity and
cellulose content of plant fibres by density methods”, J.Mat.Sci
Letters, Vol. 20, No. 23, pp. 2095-2096, December 2001.
116. Nishimura, T. and Ansell,
M.P., “The relationship between the arrangement of wood strands at the surface
of OSB and the modulus of rupture determined by image analysis”, Wood Sci. and
Tech., 35 (2002) 555-562.
117. Bainbridge, R., Mettem,
C., Harvey, K.
and Ansell, M., “Bonded-in rod
connections for timber structures – development of design methods and test
observations”, Int. J. of Adhesion and Adhesives, 22 (2002) 47-59.
118. Mwaikambo,
L.Y. and Ansell, M.P., “Chemical
modification of hemp, sisal, jute and kapok fibres by alkalisation”,
Journal of Applied Polymer Science, 84 (2002), 2222-2234.
119. Nishimura, T., Ansell,
M.P. and Ando, N., “Evaluation of the arrangement of wood strands at the
surface of OSB by image analysis”, Wood Science and Technology 36 (2002) 1, 93-99.
120. Thompson, R.J.H., Ansell,
M.P, Bonfield, P.W. and Dinwoodie,
J.M., “Fatigue in wood-based panels. Part 1: The strength variability and
fatigue performance of OSB, chipboard and MDF”, Wood Science and Technology 36 (2002) 3, 255-269.
121. Nishimura,
T. and Ansell, M.P., “Monitoring fibre orientation in OSB during production using
filtered image analysis”, Wood Science and Technology 36 (2002) 3, 229-239.
122. Nishimura, T. and Ansell,
M.P., “Fast Fourier Transform and filtered image analysis of fibre orientation
in OSB”, Wood Science and Technology, 36,
(2002) 4, 287-307.
123. Alam, P. and Ansell, M.P., “Effect of nail density on the
flexural properties of
structural LVL-steel flitch beams connected by fired nails”,
Proceedings of 7th World Conference on Timber Engineering, Shah
Alam, Malaysia, August 12th-15th 2002.
124. Mwaikambo,
L.Y. and Ansell, M.P., “Hemp fibre
reinforced cashew nut shell liquid composites”, Composites Science and
Technology, 63, (2003) 9, 1297-1305.
125. Mwaikambo, L.Y. and Ansell M.P., “Thermoset biopolymers” in “An
introduction to low environmental impact polymers”, Rapra
Technology Limited, Shropshire, United
Kingdom (Book Chapter), ISBN 1-85957-384-3,
(2003).
126. Alam, P. and Ansell,
M. P. (2003); “Failure analysis and finite element modelling of
timber-steel-timber composites connected by shot-fired bainitically
hardened nails and subjected to short-term lateral shear”; Proceedings of
Second International Conference of the European Society for Wood Mechanics;
Stockholm, Sweden.
127. Alam, P. and Ansell,
M. P. (2003); “Development of a finite element model to predict the flexural
response of steel-LVL composite beams connected by fired nails and subjected to
static bending loads”; Proceedings of Second International Conference of the
European Society for Wood Mechanics; Stockholm, Sweden.
128. Alam, P., Ansell, M.
P. and Smedley, D. (2003); Mechanical properties of composite timber flitch
beams laminated vertically with fibre reinforced plastic and steel
reinforcements; Proceedings of 2nd International Symposium on Integrated Life
Time Engineering of Buildings and Civil Infrastructures; Kuopio, Finland.
129. Aziz, S.H and Ansell,
M.P. (2003), “Dynamic mechanical thermal analysis of kenaf
fibre composites”, Proceedings of ECOCOMP 2, Queen Mary University of London,
1-2 September 2003.
130. Abdan, K., Ansell,
M.P., Harun, J., Dahlan, K.Z.M. and Janius, R., (2003), “Distribution analysis and dynamic
mechanical behaviour of oil palm empty fruit bunch
fibre filled polypropylene composites”, Proceedings of ECOCOMP 2, Queen Mary
University of London, 1-2 September 2003.
131. Nishimura, T., Amin, J. and Ansell, M.P. (2004), “Image analysis and bending properties of model OSB panels as a
function of strand distribution, shape and size”, Wood Science and Technology,
38: 297-309.
132. Ansell, M.P. (2003),
“Fatigue of wood and wood panel products”, Chapter 12 (pp 339-361) in “Fatigue
in composites - science and technology of the fatigue response of
fibre-reinforced plastics”, Ed. Bryan Harris, Woodhead Publishing Ltd ISBN 1
85573 608 X.
133. Mwaikambo, L.Y.,
Clark, A.J. and Ansell, M.P. (2003),
“Determination of
cure characteristics of cashew nut shell liquid for composite manufacture”,
Proceedings of the 2nd International Conference of the African Materials
Research Society, University of Witwatersrand, Johannesburg South Africa, 8-11
December 2003, ISBN 0 620 31513 X, P.
48-49.
134. Ansell, M.P., Murphy, R.J. and Hillier, B.
(2004), "Life-cycle design for engineered timber products", Chapter 9
(pp 211-231) in "Towards an environment research agenda, a third selection
of papers", Ed. Adrian Winnett, Pub. Palgrave
Macmillan ISBN 0 333 67481 2.
135. Aziz, S.H. and Ansell, M.P. (2004), "The effect of
alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre
composites: Part 1 – Polyester resin matrix", Composites Science and
Technology, 64, 1219-1230.
136. Aziz, S.H. and Ansell, M.P. (2004), "The effect of
alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre
composites: Part 2 – Cashew nut shell liquid matrix", Composites Science
and Technology, 64, 1231-1238.
137. Madhoushi, M. and Ansell,
M.P. (2004), “Experimental study of static and fatigue strengths of pultruded
GFRP rods bonded into LVL and glulam”, Int J of
Adhesion and Adhesives, 24, 319-325.
138. Alam, P., Ansell, M.
P. and Smedley, D. (2004), “Finite element analysis of timber composites
reinforced with bonded-in steel plates and rods”, Proceedings of the 8th
World Conference on Timber Engineering (WCTE 2004), Lahti, Finland, Volume 1,
pp 333-338.
139. Madhoushi, M. and Ansell,
M.P. (2004), “Flexural fatigue of beam to beam connections using glued-in GFRP
rods”, Proceedings of the 8th World Conference on Timber Engineering
(WCTE 2004), Lahti, Finland, Volume I, pp 319-326.
140. Alam, P., Ansell, M.
P. and Smedley, D. (2004), “Flexural properties of steel and FRP reinforced LVL
composites”, Proceedings of the 8th World Conference on Timber
Engineering (WCTE 2004), Lahti, Finland, Volume III, pp 342-346.
141. Madhoushi, M. and Ansell,
M.P. (2004), “Fatigue and cyclic loading of moment-resisting structures
connected using glued-in GFRP rods”, Proceedings of the 8th World
Conference on Timber Engineering (WCTE 2004), Lahti, Finland, Volume III, pp
347-352.
142. Aziz, S.H and Ansell,
M.P. (2004), “Optimizing the properties of green composites”, Chapter 8 of
“Green composites –polymer composites and the environment”, ed. Caroline
Baillie, Woodhead Publishing Ltd, ISBN 1 85573 739 6.
143. Alam, P., Ansell, M.
P. and Smedley, D. (2004), “Reinforcement of LVL beams with bonded-in plates
and rods - effect of placement of steel and FRP reinforcements on beam strength
and stiffness”, International Council for Research and Innovation in Building
and Construction, Working Commission W18 – Timber Structures (CIB W18) –
Proceedings of Meeting 37, Edinburgh, August 2004, Paper 37-12-2, ISSN
0945-6996.
144. Towo,
A.N., Ansell, M.P., Pastor,
Marie-Laetitia and Packham, D.E., (2005), “Weibull analysis of microbond shear strength at sisal fibre–polyester resin
interfaces” Composite Interfaces, Vol. 12,
No. 1, pp77-93.
145. Aziz, S.H., Ansell, M.P., Clarke, S.J. and Panteney,
S.R., (2005), “Modified polyester resins for kenaf
natural fibre composites”, Composites
Science and Technology, Volume 65, Issues 3-4, pp 525-535.
146. Towo, A.N., Ansell,
M.P.,
(2005) “Weibull analysis of interfacial adhesion between thermosetting resin
and sisal fibres using the droplet pull-out test”, Procs. of the Third
International Workshop on Green Composites (IWGC-3), 16th-17th
March 2005, Kyoto, Japan, pp 190-194.
147. Thompson, R.J.H., Ansell,
M.P, Bonfield, P.W. and Dinwoodie,
J.M., (2005) “Fatigue in wood-based panels. Part 2: Property changes during
fatigue cycling of OSB, chipboard and MDF”, Wood Science and Technology, Volume
39, No. 4, pp 311-325.
148. Gonzalez-Murillo, C., Walker,
P.J., Ansell, M.P., (2005)
"Henequen fibres for reinforcement of unfired earth blocks", Procs.
of the Eleventh International Conference for Renewable Resources and Plant
Biotechnology (NAROSSA), 6th-7th June 2005, Poznan, Poland,
pp 121-126.
149. Towo, A N., Ansell M.P,
(2005) “Fatigue evaluation of sisal fibre - thermosetting resin composites”,
presented at EUROMAT 2005, Prague,
5 - 8th September 2005.
150. Madhoushi, M., Ansell M.P., Hashemi, M.,
(2006) “Application of NDT stress wave method for assessing property changes in
decayed wood of Iranian beech (Fagus orientalis)”, Proceedings of “International
Conference on Integrated approach to wood structure, behaviour
and applications”, Eds., Fioravanti, M. and Macchioni, N., Florence, Italy, p. 23.
151. Madhoushi, M., Dahmardeh, M. and Ansell M.P (2006) “Utilization of reed in the surface layer of
particleboard”,
Proceedings of International Conference on “Integrated approach to wood
structure, behaviour and applications”, Eds., Fioravanti, M. and Macchioni, N.,
Florence, Italy, p. 46.
152. Mwaikambo, L.Y. and Ansell,
M.P. (2006) “Mechanical properties of alkali treated plant fibres and their
potential as reinforcement materials. Part I. Hemp fibre”, Journal of Materials
Science, Volume 41, No. 8, pp 2483-2496.
153. Mwaikambo, L.Y. and Ansell, M.P., (2006) “Mechanical properties of
alkali treated plant fibres and their potential as reinforcement materials,
Part II. Sisal fibre”, Journal of Materials Science, Volume 41, No. 8, pp
2497-2508.
154. Alam, P., Ansell, M.
P. and Smedley, D. (2006), “Repair of fractured spruce beams with bonded-in reinforcements”, Proceedings of 9th World Conference on Timber Engineering, WCTE,
Portland, Oregon, USA, 6-10 August 2006.
155. Ahmad, Z., Ansell.
M.P. and Smedley, D. (2006) “The mechanical
properties and microstructure of nano- and microparticle-filled epoxy adhesives for bonded-in timber
connections”, Proceedings
of 9th World Conference on Timber
Engineering, WCTE, Portland, Oregon, USA, 6-10 August 2006.
156. Alam, P., Smedley, D., Ansell,
M.P. (2006), “George
Street, St. Albans, UK – a case study in the repair of historic timber
structures using bonded-in pultruded plates”, Proceedings of 9th World Conference on Timber Engineering, WCTE,
Portland, Oregon, USA, 6-10 August 2006.
157. Somani,
K., Mellersh, P., Shepherd, S. and Ansell,
M.P. (2006) “Effect of high temperature and high pressure on the water
absorption and thermal conductivity of phenolic syntactic foam”, Proceedings of
American Society for Composites, 21st Annual Technical Conference,
17-20 September, The University of Michigan, Dearborn, MI, USA.
158. Fisher, S., Vogwell, J. and Ansell,
M.P., (2006) "The measurement of hand loads and the centre of percussion
of cricket bats”, Proc. IMechE, Part L: J. Materials:
Design and Applications, Vol. 220, Issue L4, pp 249-258.
159. Ahmad, Z., Ansell.
M.P. and Smedley, D. (2006) “Influence of nanofillers
on the thermal and mechanical behaviour of DGEBA
based adhesives for bonded-in timber connections”, Mechanics of Composite
Materials, Volume 42, No 5, pp 419-430.
160. Price, G.J., Pastor, M-L., Towo, A.N., Ansell,
M.P. and Packham, D.E. (2007) “Shear strength at Sisal fibre-polyester resin
interfaces: use of inverse gas chromatography to study pretreatment effects”,
Composite Interfaces, Vol. 14, No. 1, pp. 21-31.
161. Ahmad, Z., Ansell. M.P. and Smedley, D. (2007), “Effect
of nano- and micro-filler additions on the
environmental stability of dgeba-based epoxy
adhesives for bonded-in timber connections”, in Proceedings of Advanced
Composites in Construction (ACIC 2007), 2-4 April 2007, University of Bath.
162. Smedley, D., Alam, P., Ansell,
M.P. (2007), “George Street, St. Albans, UK – a case study in the repair of
historic timber structures using bonded-in pultruded plates”, in
Proceedings of Advanced Composites in Construction (ACIC 2007), 2-4 April 2007,
University of Bath.
163.
Gonzalez Murillo, C., Fagan, M., Ansell, M. P., Meo, M., (2007) “Experimental and finite
element studies of adhesively bonded lap joints for natural fibre composites”
in Proceedings of 16th International Conference on Composite Materials
(ICCM-16), Kyoto, Japan, July 8th to 13th, 2007.
164.
Ansell, M.P. (2007), “Overview of
sports engineering, sports science, coach development and sports development
and recreation at the University of Bath”,
Proceedings of the UK-China
Sports Engineering Workshop, Eds. Jiang,Y., Chen, Q.,
Gao, J. and Li, X., Beijing, China, 21st
– 23rd November, 2006, ISBN 978-1-84626-164-0.
165. Madhoushi, M., Ansell, M.P. & Hashemi,
M. (2006), “Application of NDT stress wave method for assessing property
changes in decayed wood of Iranian beech (Fagus orientalis)”,
Integrated Approach to Wood Structure, Behaviour and
Applications; Proc. ESWM and COST
Action E35 meeting, Florence, 14-17
May, 2006.
166. Madhoushi, M. and Ansell,
M.P. (2008), “Behaviour of timber
connections using glued-in GFRP rods under fatigue loading - Part I : in-line
beam to beam connections”, Composites: PartB, 39,
243-248.
167. Madhoushi, M. and Ansell,
M.P.(2008), “Behaviour of timber connections using
glued-in GFRP rods under fatigue loading – Part II: moment –resisting
connections”, Composites: PartB, 39, 249-257.
168. Towo, A.N., Ansell,
M.P. (2008), “Fatigue evaluation and dynamic mechanical thermal analysis of
sisal fibre - thermosetting resin composites”, Composites Science and
Technology, 68, 925-932.
169. Towo, A.N., Ansell,
M.P. (2008), “Fatigue of sisal fibre reinforced
composites: constant life diagrams and hysteresis loop capture”, Composites Science and Technology,
68, 915-924.
170.
Ansell, M.P. and Smedley, D. (2008),
“Bonded-in technology for structural timber”, Proceedings of the Institution of
Structural Engineers, Construction Materials, Vol. 160, Issue CM3, 95-98.
171.
Gonzalez Murillo, C., Walker, P.J., Ansell,
M.P., (2008),"Henequen fibres for reinforcement of unfired earth
blocks", Chapter in book entitled “Renewable Resources and Plant
Biotechnology”, Edited by R. Kozlowski, G.E. Zaikov
and F Pudel, Nova Science Publishers, Inc., Hauppauge
NY, USA, ISBN 1-60021-003-1, 41-49.
172.
Crabtree, P., Dhokia, V., Ansell,
M.P. and Newman, S.T.(2008), “Design and manufacture of customized orthotics
for sporting applications”, in “The Engineering of Sport 7, Vol. 1, Eds. Margaret
Estivalet and Pierre Brisson, Pub. Springer-Verlag, pp 309-317, ISBN-13:
978-287-09410-1.
173.
Crabtree, P., Dhokia, V., Ansell,
M.P. and Newman, S.T.(2008), “A framework for the manufacture of personalized
sport orthotic insoles”, Proceedings of the 18th
International Conference on Flexible Automation and Intelligent Manufacturing, Skövde, Sweden June 30 – July2, 2008.
174. Dhokia, V.G., Crabtree, P.,
Newman, S.T., Ansell, M.P. and
Mileham, A.R., “The development of cryogenic machining knowledge”, Proceedings
of the 18th International Conference on Flexible Automation and Intelligent
Manufacturing, Skövde,
Sweden June 30
– July2, 2008.
175. Ahmad, Z., Ansell. M.P., Smedley, D. and Simpson, D.J. (2008), “Fracture toughness properties of
epoxy-based adhesives reinforced with nano- and microfiller additions for in situ timber bonding”, Proceedings of the World Conference on Timber Engineering, Miyazaki, Japan,
June 2008.
176. Madhoushi, M., Eimanian, J. and Ansell, M.P.(2008), “Non-destructive and laboratory
evaluation of strength of decayed wood members in a historic construction
located in Gorgan (North of Iran)”, Proceedings of
6th International Conference on Structural Analysis of Historic Construction
(SAHC 08), 2-4 July 2008, Assembly Rooms, Bath. In
“Structural analysis of historic construction: preserving safety and
significance, Vols 1 and 2, pp. 469-472.
177. Alam, P., Ansell, M.
P. and Smedley, D. (2009), “Mechanical repair of timber beams fractured in
flexure using bonded-in reinforcements”, Composites PartB: Engineering, 40(2), pp.
95-106.
178. Madhoushi, M. Nadalizadeh, H. and Ansell,
M.P.(2009), “Withdrawal strength of fasteners in rice straw fiber-thermoplastic
composites under dry and wet conditions”, Polymer Testing,
28(3), pp. 301-306.
179. Ansell, M.P. (2009),
“Knock on wood – wood for engineering”, MADE Magazine (the magazine for the
Materials and Design Exchange, the design network group of the Materials
Knowledge and Transfer Network, IOM Communications Ltd), ISSN 1753-2973, Issue,
1.09, pp. 50-51.
180. Prajer, M. and Ansell,
M.P. (2009), “Thermomechanical evaluation of sisal-PLA composites”, Proceedings
of the 17th International Conference on Composite Materials, 27-31
July 2009, Edinburgh.
181. Dhokia, V.G., Crabtree, P., Newman, S.T., Ansell, M.P. (2009), “A methodology for the
determination of foamed polymer contraction rates for the cryogenic manufacture
of shoe insoles”, Proceedings of the 19th International Conference
on Flexible Automation and Intelligent Manufacturing (FAIM 2009), 6-8 July
2009, Teesside University, Middlesborough, UK, pp.
947-954.
182. Gonzalez Murillo, C. and Ansell,
M.P., (2009) “Mechanical
properties of henequen fibre and epoxy resin composite material”, Mechanics of
Composite Materials Vol. 45, No. 4, pp. 435-442. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 45, No. 4, pp. 631-640, July-August 2009.
183. Prajer, M. and Ansell,
M.P. (2009), “Interfacial micromechanics in PLA/sisal fibre composites”,
Proceedings of the 11th International Conference on Non-conventional
Materials and Technologies (NOCMAT 2009), 6-9 September 2009, University of
Bath.
184. Thomson, A., Harris, R., Walker, P. and Ansell, M.P. (2009), “Contemporary metal-free dowel
connections for timber structures”, Proceedings of the 11th
International Conference on Non-conventional Materials and Technologies (NOCMAT
2009), 6-9 September 2009, University of Bath.
185. Ansell, M. P. and Mwaikambo, L.Y. (2009), “The structure of cotton and other
plant fibres”, chapter in “Handbook of textile fibre
structure, Volume 2: Natural, regenerated, inorganic and specialist fibres”,
Eds. S.J. Eichhorn, J.W.S. Hearle,
M. Jaffe and T. Kikutani, Woodhead Publishing, ISBN
978-1-84569-730-3.
186. Crabtree, P.,
Dhokia, V., Ansell M.P., Newman,
S.T. (2009), “Cryogenic manufacture of a customised
football boot insole”, Proceedings of the 4th Asia-Pacific Congress
on Sports Technology (APCST 2009), Honolulu,
21-23 September 2009.
187. Dhokia, V.,
Crabtree, P., Newman, S.T., Ansell,
M.P., Allen, R.D. (2009), “Rapid Craft CNC Machining of Personalised
Orthotic Insoles for Medical and Sporting Applications”, 4th Asia-Pacific
Congress on Sports Technology, (APCST 2009), pp151-155, Hawaii,
USA,
Sept 2009.
188. Prajer, M. and Ansell, M.P.
(2009), “Interfacial micromechanics in PLA/sisal fibre composites”, Proceedings
of Natural Fibre ’09, 14-15 December 2009, Institute of Materials, Minerals and
Mining, London, UK.
189. Ansell, M.P., Gonzalez Murillo, C., Fagan, M., Thomson, M. (2009), “High integrity
joints for sisal-epoxy composites”, Proceedings of Natural Fibre ’09, 14-15 December
2009, Institute of Materials, Minerals and Mining, London, UK.
190. Crabtree, P., Dhokia, V., Ansell
M.P., Newman, S.T. (2009), “Manufacturing methodology for personalized
symptom-specific sports insoles”, Robotics and Computer-Integrated Manufacturing,
Volume 25, Issue 6, pp 972-979.
191. Roseley,
A.S.M., Ansell, M.P., Dave Smedley
(2009), “Optimization of the glass transition temperature and cure regime for
structural timber adhesives used for on site bonding”, Proceedings of
International Conference on Wood Adhesives, Lake Tahoe, Nevada, 28-30 September
2009.
192. Ahmad, Z., Ansell, M.P., Dave Smedley (2010) “Effect of environments on the stability of
epoxy-based adhesive for bonded-in timber connections”, International Journal
of Mechanical and Materials Engineering, Vol. 4, No. 3, pp 285-293.
193. Gonzalez
Murillo, C. and Ansell, M.P.,
(2010), “Co-cured in-line joints for natural fibre
composites”, Composites Science and Technology, Volume 70, Issue 3, pp 442-449.
194. Ahmad, Z., Ansell, M.P., Dave Smedley (2010) “Effect of nano-
and micro-particle additions on moisture absorption in thixotropic room
temperature cure epoxy-based adhesives for bonded-in timber connections”, Int J. of Adhesion and Adhesives,
Vol. 30, Issue 6, 448-455.
195. Ansell, M.P., Roseley, A.S.M., Dave Smedley (2010), “Environmental stability of
room temperature cure epoxy adhesives for timber structures under static and
creep loading”, Proceedings of the World Conference on Timber Engineering, Trentino, Italy,
June 2010, Paper No. 251.
196. Ahmad, Z., Ansell,
M.P.,
Dave Smedley (2010) “Epoxy
adhesives modified with nano- and micro-particles for
in-situ timber bonding:effect
of microstructure on bond integrity”, International Journal of Mechanical and Materials Engineering, Vol. 5, No. 1, pp 59-67.
197. Bawcombe, J., Harris, R., Walker, P., Ansell, M. (2010) “A
multidisciplinary study assessing the properties of Douglas-fir grown in the
South West region of the United Kingdom”, Proceedings of World Conference on
Timber Engineering, Trentino, Italy, June 2010, Paper No. 427.
198. Thomson, A.,
Harris, R., Walker,
P., Ansell, M. (2010) “Development
of non-metallic timber connections for contemporary applications”, Proceedings
of World
Conference on Timber Engineering, Trentino, Italy, June 2010, Paper No. 292.
199. Ahmad, Z., Ansell,
M.P.,
Dave Smedley (2010) “Fracture
toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding”, Int J of Adhesion
and Adhesives, 30, 539-549.
200. Dhokia, V., Newman, S.T.,
Crabtree, P., Ansell M.P. (2010) “A process control system for
cryogenic CNC elastomer machining”, Procs. of the 20th International
Conference on Flexible Automation and Intelligent Manufacturing, San Francisco, USA, July 2010.
201.
Dhokia, V., Newman, S.T., Crabtree, P., Ansell M.P. (2010) “Process control for
cryogenic CNC machining of soft elastomers”, Robotics and Computer-Integrated
Manufacturing, 27(4), pp 779-784. DOI: 10.1016/j.rcim.2011.02.006.
202. Dhokia, V., Newman, S.T.,
Crabtree, P., Ansell M.P. (2010) “The formation of adiabatic shear band
formation as a result of cryogenic machining of low-density materials’, Procs.
of the Matador Conference, Manchester,
2010.
203. Thomson,
Andrew, Harris, Richard,
Ansell, Martin P., Walker, Pete (2010) “ Experimental
performance of non-metallic mechanically fastened timber connections”, The
Structural Engineer, Vol. 88, Issue 17, pp 25-32.
204. Dhokia,
V., Newman, S.T., Crabtree, P., Ansell M.P. (2010) “A methodology for the determination
of foamed polymer contraction rates as a result of cryogenic CNC machining”, Robotics and Computer-Integrated
Manufacturing, Vol. 26, Issue 6, 665-670.
205. Rebecca A. Belisle, Irene G. Turner, and Martin P. Ansell (2011) “Evidence of biocomposite
structure in Colletes halophilus
nest material” Journal of
Materials Science: Volume 46, Issue 18, 6154-6157.
206. Roseley,
A.S.M., Rojo, E, Ansell, M.P., Smedley, D.
(2011) “Creep
response of thixotropic ambient temperature cure adhesives measured by DMTA in
static tension and shear”, Int. J of Adhesion and Adhesives, vol 31, Issue 6, pp 575-582. DOI:
10.1016/j.ijadhadh.2011.05.00.
207. Ahmad, Z., Ansell, M.P.,
Smedley D. (2011) Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Fracture
Toughness Characteristics Journal of Engineering Materials and
Technology - Transactions of the ASME, 133(3). DOI: 10.1115/1.4003776
208. Ansell, M.P. (2011)
Wood – a 45th
anniversary review of JMS papers, Part 1. The wood cell wall and mechanical
properties, Journal of Materials Science, 46 (23) pp
7357-7368. DOI: 10.1007/s10853-011-5995-5.
209. Ansell,
M.P. (2012) Wood – a 45th anniversary review of JMS papers, Part 2.
Wood modification, fire resistance, carbonization, wood-cement and wood-polymer
composites, Journal of Materials Science, 47 (2) pp 583-598. DOI:
10.1007/s10853-011-5995-5.
210. Touaiti, F., Alam, P., Toivakka,
M., Ansell, M.P. (2012) “DMTA investigation of solvents effects on viscoelastic
properties of porous CaCO3- SBR latex composites” Mechanics of Materials, 49,
pp 1-12, DOI: 10.1016/j.mechmat.2012.01.007.
211. Dhokia,
V., Newman, S.T., Crabtree, P., Ansell M.P. (2011) “Adiabatic shear band formation as a
result of cryogenic CNC machining of elastomers”, Procs. of the Institution of Mechanical Engineers, Part B: Journal
of Engineering Manufacture, vol. 225, issue B9, pp1482-1492, DOI:
10.1177/0954405411415318.
212. Archila-Santos, H.F., Ansell, M.P., Walker,
P. (2012), “Low carbon construction using Guadua
bamboo in construction”, Key Engineering Materials, vol. 517, pp 127-134. DOI:
10.4028/www.scientific.net/KEM.517.127.
213. Prajer, M. and Ansell, M.P. (2012),
“Observation of transcrystalline growth of PLA
crystals on sisal fibre bundles and the effect of crystal structure on
interfacial shear strength”, Composite Interfaces, 19 (1), 39-50. DOI:
10.1080/09276440.2012.688398.
214. Alam, P.,
Ansell, M. P. and Smedley, D. (2012), “Adhesively bonded plate and rod
reinforcements for timber flexural beams”, International Wood Products Journal,
4 (1) pp 52-61.
215. Alam, P.,
Ansell, M. P. and Smedley, D. (2012), “Effects of reinforcement geometry on
strength and stiffness in adhesively bonded steel-timber flexural beams”,
Buildings, 2 (3), pp 231-244.
216. Ahmad, Z.,
Ansell, M.P., Smedley D, Tahir PM (2011) “Creep behavior of epoxy-based
adhesives reinforced with nano-particles bonded-in timber
connection” Journal of Materials in Civil Engineering, 24 (7), pp. 825-831.
217. Ahmad, Z.,
Ansell, M.P., Smedley D, Tahir PM (2012) “Effect of environments on the thermal
properties of epoxy adhesives modified with nano- and
micro-particles for in-situ timber bonding” Indian Journal of Engineering and
Materials Sciences, 19(5), pp 343-356
218. Touaiti,
F., Pahlevan, M., Nilsson, R., Alam, P., Ansell, M.
P., Wilén, C. E. and Toivakka,
M. (2013); Impact of functionalised dispersing agents
on the mechanical and viscoelastic properties of porous composites; Progress in
Organic Coatings, 76, pp 101-106. DOI: 10.1016/j.porgcoat.2012.08.013.
219. Touaiti,
F., Alam, P., Nilsson, R., Pahlevan, M., Ansell, M.
P., Wilén, C. E. and Toivakka,
M. (2013); Thermomechanical properties of CaCO3-latex pigment coatings: impact
of modified dispersing agents; Progress in Organic Coatings, 76, pp 439-446.
DOI: 10.1016/j.porgcoat.2012.10.026.
220. Ansell, M.P. (2013) “Multi-functional
nano-materials for timber in construction”, Institute
of Civil Engineering (ICE) - Construction Materials Journal, 166(4) pp 248-256.
221. Brennan, J., Pedreschi, R., Walker, P., Ansell, M. (2013) “The potential
of advanced textiles for fabric formwork” Institute of Civil Engineering (ICE)
- Construction Materials Journal, 166 (4) pp. 229-237.
222. Ansell, M.P. (2013) “Sisal
fibre bundle composites—a review of properties in relation to microstructure”, Composite
Science and Technology: 2020-Scientific and Technical Challenges: Proceedings
of the 9th International Conference on Composite Science and Technology
(ICCST-9), pp. 435-447, Pub. DEStech Publications
Inc., ISBN 978-1-60595-113-3.
223. Madhoushi, M., Chavooshi, A., Ashori, A.,
Ansell, M.P. and Shakeri, A. (2013) “Properties of
wood plastic composite panels made from waste sanding dusts and nanoclay” Journal of Composite Materials, published
online 30 May 2013, DOI: 10.1177/0021998313489899.
224. Archila-Santos, H.F., Ansell, M.P., Walker,
P. (2014), “Elastic properties of thermo-hydro-mechanically modified bamboo (Guadua angustifolia Kunth) measured in tension”, Key Engineering Materials,
vol. 600, pp 111-120. DOI: 10.4028/www.scientific.net/KEM.600.111.
225. Ansell, M.P. (2014) “Natural
fibre composites in marine environments”, in “Natural fibre composites:
Materials, processes and properties”, Eds. Alma Hodzic
and Robert Shanks, pp. 365-374, Pub. Woodhead Publishing Ltd, ISBN 0 85709 524
2.
226. Brandon, B., Ansell, M.P.,
Harris, R., Walker, P. (2014) “Modelling of non-metallic timber connections at
elevated temperatures”, In “Materials and Joints in Timber Structures”, RILEM Bookseries Vol. 9, pp 231-241, DOI 10.1007/978-94-007-7811-5_22,
Pub. Springer Netherlands.
227. Huang, P., Chang, W-S, Shea,
A., Ansell, M.P., Lawrence, M. (2014) “Non-homogeneous thermal properties of
bamboo”, In “Materials and Joints in Timber Structures”, RILEM Bookseries Vol. 9, pp 657-664,
10.1007/978-94-007-7811-5_59, Pub. Springer Netherlands.
228. Brandon, B., Thomson, A., Ansell,
M.P., Bregulla, J., Harris, R., Walker, P. (2014)
“Stiffness modelling of non-metallic timber connections with pultruded dowels”,
Proceedings of the International Civil and Infrastructure Engineering
Conference 2013 (InCIEC 2013), pp 37-49, DOI 10.1007/978-981-4585-02-6_4,
Pub. Springer Singapore.
229. Prajer, M. and Ansell, M.P.
(2014), “Bio-composites for structural applications: poly-L-lactide
(PLLA) reinforced with long sisal fibre bundles” accepted for publication in
Journal of Applied Polymer Science.
230. Madhoushi, M., Chavooshi, A., Ashori, A.,
Ansell, M. P. & Shakeri, A. (2014), “Properties
of wood plastic composite panels made from waste sanding dusts and nanoclay”, Journal of Composite Materials. 48(14), pp.
1661-1669.
231. Brandon, D., Walker, P., Harris,
R., Ansell, M., Bregulla, J. (2014) “Viscoelastic
creep of dowel type timber construction”. In Experimental Research with Timber,
Ed. Kaye-Uwe Schober, COST Action FP1004, Czech
Technical University in Prague, 21-23 May 2014, pp. 13-16.
232. Brandon, D., Ansell, M.P., Harris,
R., Walker, P., Bregulla, J. (2014) “Modelling of
non-metallic timber connections at elevated temperatures”. In Materials and
Joints in Timber Structures, Springer, RILEM Bookseries
Volume 9: 231-241.
233. Brandon, D., Ansell, M.P.,
Harris, R., Maluk, C., Bregulla,
J., Harris, R., Walker, P. (2014) “Behaviour of
non-metallic shear connections in fire”, Proceedings of the 2014 World
Conference on Timber Engineering, Quebec City Canada, 10-14 August 2014.
234. Huang, P., Chang, W-S, Shea,
A., Ansell, M.P., Lawrence, M. (2014) “Non-homogeneous thermal properties of
bamboo”, In Materials and Joints in Timber Structures. RILEM Bookseries Volume 9: 657-664
235. Huang, P., Chang, W-S,
Ansell, M.P., Chew, J., Shea, A., (2015) “Density distribution profile for
internodes and nodes of Phyllostachys edulis (Moso bamboo) by computer tomography scanning”, Construction
and Building Materials, 93, pp. 197-204.
236. Bawcombe, J., Harris, R., Walker, P.
& Ansell, M.,
(2015) “The
quality of Douglas-fir grown in the United Kingdom” In Proceedings of the
Institution of Civil Engineers: Construction Materials. 168, 3, p. 99-109.
237. Ansell, M.P. (edited book)
(2015) “Wood composites” Three chapters: Chapter 1: “Wood microstructure – a
cellular composite”, Chapter 15: “Carbonised and mineralized
wood composites”, Chapter 16: “Hybrid wood composites – integration of wood
with other engineering materials”, Pub. Woodhead Elsevier, ISBN:
978-1-78242-454-3.
Modified 21st October 2015